164-Hour Oil and Gas Safety and Health Supervisor
The IOSHQ 164-Hour Oil and Gas Safety and Health Supervisor program provides structured education in oil and gas safety supervisor, hazard recognition, risk control, safer work practices and occupational safety responsibilities relevant to oil & gas safety environments.
Oil and Gas Safety Supervisor Education
The 164-Hour Oil and Gas Safety and Health Supervisor program provides a defined learning pathway for personnel seeking structured knowledge of occupational hazards, controls, responsibilities and safer work practices within its subject area.
The curriculum connects hazard recognition with preventive action, communication, incident reporting and organizational safety systems. Content is educational and should be applied alongside employer procedures, site-specific requirements and applicable law.
Hazard Recognition
Identify relevant workplace hazards and understand conditions that can increase occupational risk.
Risk Control
Understand preventive controls, procedures and safer work practices appropriate to the program subject.
Safety Responsibility
Reinforce communication, reporting, accountability and participation in organizational safety systems.
164-Hour Oil and Gas Safety and Health Supervisor Program Specification
This specification summarizes the program’s educational purpose, learning commitment, subject field, orientation, assessment basis and completion framework.
Official Title
164-Hour Oil and Gas Safety and Health Supervisor
Institution
Institute of Occupational Safety, Health & Quality Management (IOSHQ).
Learning Commitment
164 Hours of structured learning where a defined hour value applies.
Subject Field
Oil & Gas Safety with emphasis on oil and gas safety supervisor.
Program Orientation
Hazard recognition, risk control, safer work practices, communication and safety responsibility.
Completion
Applicable IOSHQ credential following successful completion of established learning and assessment requirements.
Developing Capability in Oil and Gas Safety Supervisor
The program is designed to strengthen occupational safety knowledge through structured study of hazards, controls, safe-work principles and organizational responsibilities.
Recognize Hazards
Build awareness of hazards and exposure pathways relevant to the program environment.
Understand Controls
Connect identified hazards with appropriate preventive and protective measures.
Support Safer Work
Reinforce procedures, communication, reporting and responsible safety behavior.
Who Is the 164-Hour Oil and Gas Safety and Health Supervisor Program For?
The program is intended for personnel whose work, supervisory responsibilities, support functions, training duties or safety responsibilities relate to oil & gas safety operations.
Workers & Practitioners
Personnel seeking structured safety knowledge relevant to their work activities and environment.
Supervisors & Team Leads
Personnel who coordinate work and support implementation of workplace safety procedures.
Safety Personnel
Personnel supporting hazard recognition, risk control, incident prevention and safety communication.
Operations Personnel
Personnel whose operational responsibilities interact with the hazards addressed by the program.
Training & Support Personnel
Personnel supporting workforce development, orientation or safety-related learning activities.
Developing Professionals
Learners building broader occupational safety knowledge as part of continuing professional development.
Oil and Gas Safety Supervisor Curriculum
The curriculum addresses interconnected topics selected for their relevance to the program’s occupational safety and health focus.
Supervisor safety responsibilities
Develop structured understanding of supervisor safety responsibilities and its relationship to occupational hazard recognition, risk control and safer work practices.
Field hazard recognition
Develop structured understanding of field hazard recognition and its relationship to occupational hazard recognition, risk control and safer work practices.
Job hazard analysis
Develop structured understanding of job hazard analysis and its relationship to occupational hazard recognition, risk control and safer work practices.
Risk assessment
Develop structured understanding of risk assessment and its relationship to occupational hazard recognition, risk control and safer work practices.
Pre-job planning
Develop structured understanding of pre-job planning and its relationship to occupational hazard recognition, risk control and safer work practices.
Toolbox communication
Develop structured understanding of toolbox communication and its relationship to occupational hazard recognition, risk control and safer work practices.
Permit-to-work
Develop structured understanding of permit-to-work and its relationship to occupational hazard recognition, risk control and safer work practices.
Energy isolation
Develop structured understanding of energy isolation and its relationship to occupational hazard recognition, risk control and safer work practices.
H2S awareness
Develop structured understanding of h2s awareness and its relationship to occupational hazard recognition, risk control and safer work practices.
Confined spaces
Develop structured understanding of confined spaces and its relationship to occupational hazard recognition, risk control and safer work practices.
Hot work
Develop structured understanding of hot work and its relationship to occupational hazard recognition, risk control and safer work practices.
Working at height
Develop structured understanding of working at height and its relationship to occupational hazard recognition, risk control and safer work practices.
Lifting operations
Develop structured understanding of lifting operations and its relationship to occupational hazard recognition, risk control and safer work practices.
Mobile equipment
Develop structured understanding of mobile equipment and its relationship to occupational hazard recognition, risk control and safer work practices.
Drilling hazards
Develop structured understanding of drilling hazards and its relationship to occupational hazard recognition, risk control and safer work practices.
Process hazards
Develop structured understanding of process hazards and its relationship to occupational hazard recognition, risk control and safer work practices.
Contractor coordination
Develop structured understanding of contractor coordination and its relationship to occupational hazard recognition, risk control and safer work practices.
Emergency response
Develop structured understanding of emergency response and its relationship to occupational hazard recognition, risk control and safer work practices.
Incident reporting
Develop structured understanding of incident reporting and its relationship to occupational hazard recognition, risk control and safer work practices.
Incident investigation
Develop structured understanding of incident investigation and its relationship to occupational hazard recognition, risk control and safer work practices.
Corrective action
Develop structured understanding of corrective action and its relationship to occupational hazard recognition, risk control and safer work practices.
Safety inspections
Develop structured understanding of safety inspections and its relationship to occupational hazard recognition, risk control and safer work practices.
Performance monitoring
Develop structured understanding of performance monitoring and its relationship to occupational hazard recognition, risk control and safer work practices.
Safety leadership
Develop structured understanding of safety leadership and its relationship to occupational hazard recognition, risk control and safer work practices.
164-Hour Oil and Gas Safety and Health Supervisor Learning Outcomes
Following successful completion, learners should be able to demonstrate understanding of the principal safety concepts addressed by the applicable curriculum.
Supervisor safety responsibilities
Recognize key principles associated with supervisor safety responsibilities and explain how appropriate controls, procedures and reporting support safer operations.
Field hazard recognition
Recognize key principles associated with field hazard recognition and explain how appropriate controls, procedures and reporting support safer operations.
Job hazard analysis
Recognize key principles associated with job hazard analysis and explain how appropriate controls, procedures and reporting support safer operations.
Risk assessment
Recognize key principles associated with risk assessment and explain how appropriate controls, procedures and reporting support safer operations.
Pre-job planning
Recognize key principles associated with pre-job planning and explain how appropriate controls, procedures and reporting support safer operations.
Toolbox communication
Recognize key principles associated with toolbox communication and explain how appropriate controls, procedures and reporting support safer operations.
Permit-to-work
Recognize key principles associated with permit-to-work and explain how appropriate controls, procedures and reporting support safer operations.
Energy isolation
Recognize key principles associated with energy isolation and explain how appropriate controls, procedures and reporting support safer operations.
H2S awareness
Recognize key principles associated with h2s awareness and explain how appropriate controls, procedures and reporting support safer operations.
A Structured Approach to Oil and Gas Safety Supervisor
Effective occupational risk control depends on recognizing hazards, preparing the work, selecting controls, performing tasks responsibly and reporting conditions requiring action.
Recognize
Identify hazards, exposures, task demands and changing workplace conditions.
Assess
Consider who may be exposed, how harm may occur and what controls are required.
Control
Apply appropriate engineering, administrative, procedural and protective measures.
Perform
Follow established procedures while maintaining situational awareness.
Report
Report hazards, incidents, exposures, near misses and unsafe conditions through established systems.
Managing Risk in Oil & Gas Safety
The program reinforces a systematic relationship between hazard identification, risk assessment, control selection, communication and review.
Identify
Recognize hazards arising from tasks, equipment, substances, people and the work environment.
Evaluate
Consider exposure, potential consequences and existing controls when evaluating occupational risk.
Control
Apply appropriate controls using established organizational and workplace procedures.
Communicate
Share relevant hazard information, instructions, changes and safety expectations.
Report
Use established systems for hazards, incidents, near misses and corrective actions.
Review
Evaluate control effectiveness and support corrective action and continual improvement.
164 Hours of Structured Learning
The published learning commitment describes the structured educational scope assigned to this IOSHQ program where an hour value is specified.
Published hours describe learning commitment. They do not independently establish academic credit, professional licensure, employer authorization or demonstrated workplace competency.
Demonstrating Program Learning
Successful completion requires learners to satisfy the applicable learning and assessment requirements established for the program.
Required Learning
Complete the applicable learning components within the published curriculum.
Required Assessment
Satisfy applicable assessment and achievement requirements associated with the program.
Confirmed Completion
Completion is recorded after applicable learning and assessment requirements have been satisfied.
Oil and Gas Safety Supervisor Development Domains
The program supports educational development across hazard recognition, risk control, communication, incident prevention and safety responsibility.
Knowledge
Develop subject knowledge relevant to occupational hazards and controls.
Hazard Recognition
Strengthen the ability to recognize relevant workplace hazards and exposure conditions.
Risk-Control Awareness
Understand how preventive measures can reduce occupational risk.
Safety Communication
Support clear communication of hazards, procedures and safety expectations.
Incident Prevention
Connect reporting, corrective action and preventive controls with safer operations.
Professional Responsibility
Reinforce accountability and participation within organizational safety systems.
IOSHQ Oil and Gas Safety Supervisor Credential
Following confirmed successful completion of applicable requirements, an IOSHQ credential may be issued to document the learner’s educational achievement.
Completion Credential
Documents successful completion of applicable IOSHQ learning and assessment requirements.
Institutional Record
Applicable learner and credential information is maintained within IOSHQ institutional records.
Credential Verification
Where supported, applicable issued credentials can be checked through the IOSHQ verification system.
Quality, Accreditation & Institutional Accountability
IOSHQ maintains institutional processes addressing program design, learning outcomes, assessment, completion records, credentialing and continuing quality review. External listings provide applicable provider and institutional accreditation information.
Accredited Provider
Review IOSHQ’s applicable external provider listing directly through the accrediting organization.
Accredited Institution
Review IOSHQ’s applicable institutional listing directly through the external organization.
Academic Quality & Governance
Explore the institutional framework supporting program design, assessment, credentialing and quality review.
Education, Authorization & Competency
Program completion documents educational achievement under applicable IOSHQ requirements. It does not automatically establish workplace competency, employer authorization, professional licensure, academic credit, or equivalence to a third-party qualification.
Educational Achievement
The program documents successful completion of applicable IOSHQ educational requirements.
Employer Requirements
Employer-specific training, procedures, supervision and authorization may separately apply.
Workplace Competency
Knowledge assessment alone should not automatically be treated as proof of practical workplace competency.
Professional Status
Program completion does not independently create professional licensure or protected occupational status.
Regulatory Requirements
Applicable legal and regulatory requirements vary by jurisdiction and remain independently applicable.
Academic Equivalence
No automatic equivalence to university credit or a national qualification level should be inferred unless formally established.
Continue Your IOSHQ Learning Pathway
Oil & Gas Safety
Explore related IOSHQ programs and resources in this subject area.
Explore Related ProgramsCompetency Framework
Review the IOSHQ framework supporting structured competency development.
View Competency FrameworkAssessment & Completion
Review institutional principles governing assessment and successful completion.
View Assessment StandardsAcademic Quality
Learn about IOSHQ educational quality and academic governance processes.
Explore Academic QualityOccupational Safety & Health
Explore broader occupational safety and health learning pathways.
Explore OSHCredential Verification
Verify applicable IOSHQ credentials through the institutional verification system.
Verify Credential164-Hour Oil and Gas Safety and Health Supervisor FAQ
It is an IOSHQ educational program focused on oil and gas safety supervisor, occupational hazard recognition, risk control and safer work practices.
The published program learning commitment is 164 Hours where a defined hour value applies.
The curriculum includes Supervisor safety responsibilities, Field hazard recognition, Job hazard analysis, Risk assessment, Pre-job planning, Toolbox communication, together with related risk-control and safety-responsibility topics.
It is intended for personnel whose work, supervision, support, training or safety responsibilities relate to the program subject area.
Successful completion requires satisfaction of the applicable learning and assessment requirements established for the program.
No. Employer-specific, site-specific, practical, supervisory or jurisdictional requirements may separately apply.
No. Educational achievement and practical workplace competency are distinct. Employers or regulators may require additional practical evaluation, experience, authorization or supervision.
Where verification is supported, applicable IOSHQ credential information can be checked through the institutional credential verification system.
Explore the 164-Hour Oil and Gas Safety and Health Supervisor Program
Review the current curriculum, learning requirements, assessment framework and program information for the IOSHQ 164-Hour Oil and Gas Safety and Health Supervisor program.